- Rugged, powerful turbopump with a pumping speed of up to 260 l/s for N2
- Integrated TC 400 drive electronics
- Ideal for analytical and industrial applications
- For installation in any orientation
- With integrated water cooling for maximum gas throughput
- Flexible through the ability to employ up to 4 accessories
- Ideal for fast cycles
- Extensive accessories expand the range of applications
Similar Image
| Bearing | Hybrid |
| Compression ratio for Ar | > 1 · 1011 |
| Compression ratio for H2 | 9 · 105 |
| Compression ratio for He | > 1 · 108 |
| Compression ratio for N2 | > 1 · 1011 |
| Connection flange (in) | DN 100 ISO-F |
| Connection flange (out) | DN 16 ISO-KF/G ¼" |
| Cooling method, optional | Air |
| Cooling method, standard | Water |
| Cooling water flow | 50 l/h |
| Cooling water flow, max. | 50 l/h |
| Cooling water flow, min. | 50 l/h |
| Cooling water temperature | 15-35 °C | 59-95 °F | 288-308 K |
| Current max. | 12,5 A |
| Electronic drive unit | with TC 400 |
| Final pressure without gas ballast | < 1 · 10-7 hPa | < 7.5 · 10-8 Torr | < 1 · 10-7 mbar |
| Fore-vacuum max. for N2 | 20 hPa | 15 Torr | 20 mbar |
| Gas throughput at full rotational speed for Ar | 7 hPa·l/s |
| Gas throughput at full rotational speed for H2 | > 14 hPa·l/s |
| Gas throughput at full rotational speed for He | 20 hPa·l/s |
| Gas throughput at full rotational speed for N2 | 14 hPa·l/s |
| I/O interfaces | RS-485, Remote |
| Interface, extended | Profibus, DeviceNet, E74 |
| Mounting orientation | Any |
| Permissible radial magnetic field max. | 5.5 mT |
| Power consumption max. | 300 W |
| Protection category | IP54 |
| Pumping speed for Ar | 255 l/s |
| Pumping speed for H2 | 220 l/s |
| Pumping speed for He | 255 l/s |
| Pumping speed for N2 | 260 l/s |
| Rotation speed ± 2 % | 60,000 rpm | 60,000 min-1 |
| Rotation speed variable | 35 – 100 % |
| Run-up time | 1.8 min |
| Sound pressure level | ≤50 dB(A) |
| Venting connection | G 1/8" |
| Weight | 7 kg | 15.43 lb |
Adapters (electrical)|Profibus
Remote adapter for RS-485(PM 061 649 -X)
Adapters (electrical)|Remote
Y-Connector, shielded, M12 for accessories(P 4723 013)
Supply socket TC 400/TM 700, straight(P 4723 100)
Supply bushing, angled, for TC 400/TM 700(P 4723 101)
Adapters (electrical)|RS-232/485
Y-distributor M12 to RS-485(P 4723 010)
USB RS-485 converter(PM 061 207 -T)
Coupling M12 for RS-485(PM 061 270 -X)
Termination resistor for RS-485(PT 348 105 -T)
Power separator for RS-485(PT 348 132 -T)
Cables|Backing pump control cables
Control cable for pumping stations 0.7 m(PM 061 675 AT)
HiPace – ACP connection cable(PM 071 142 -X)
Cables|Connection cables
Cables|Extension cables
Extension cable M12 on M12(PM 061 747 -T)
Cables|Mains cables / Power cords
Mains cable 230 V AC, CEE 7/7 to C13, 3 m(P 4564 309 ZA)
Mains cable 115 V AC, NEMA 5-15 to C13, 3 m(P 4564 309 ZE)
Mains cable 208 V AC, NEMA 6-15 to C13, 3 m(P 4564 309 ZF)
Cables|RS-485 Interface cables
Interface cable, M12 m straight/M12 m straight, 3 m(PM 061 283 -T)
Interface cable, M12 m straight/ M12 m angled, 0.7 m(PM 061 791 -T)
Control Devices|Backing pump
Control Devices|Power supplies and control displays
HPU 001, Handheld Programming Unit(PM 051 510 -T)
Accessories package for HPU 001/PC(PM 061 005 -T)
TPS 310, power supply pack for wall/standard rail fitting(PM 061 342 -T)
TPS 311, power supply pack 3HU 19" rack module(PM 061 346 -T)
DCU 002, Display Control Unit(PM 061 348 AT)
Front panel kit for TPS 311(PM 061 395 -T)
Cooling|Air cooling
Air cooling for HiPace 300 with TC 400(PM Z01 302)
Air cooling for HiPace 300, 115 V(PM Z01 308)
Air cooling for HiPace 300, 230 V(PM Z01 309)
Cooling|Water cooling
Water cooling for HiPace 300 with tube fitting 1/4"(PM 016 637 -T)
Monitoring|Pressure Sensors
RPT 010, Digital Piezo/Pirani Sensor(PT R71 100)
Monitoring|Sealing gas monitoring units
Sealing gas monitoring unit G 1/8"(PM 016 911 -U)
Mounting|DN ISO-F, Mounting kits
Mounting kit for DN 100 ISO-F, including coated centering ring, splinter shield, hexagon screws(PM 016 451 -T)
Mounting kit for DN 100 ISO-F, including coated centering ring, protective screen, hexagon screws(PM 016 452 -T)
Mounting|DN ISO-K/-F, sealings
Centering ring with multifunction coating, DN 100 ISO-K/-F(PM 016 210 -U)
Mounting|Wall rail fittings
Wall rail fitting for TPS 110/180/310/400(PM 061 392 -T)
Other
TIC 010, Adapter for two sensors(PT R70 000)
Protection|DN ISO-K/-F, sealings, splinter shields, protection screens
Centering ring with multifunction coating and integrated splinter shield, DN 100 ISO-K/-F(PM 016 211 AU)
Protection|Sealing gas throttles
Sealing gas throttle for HiPace 300(PM Z01 317)
Valves|Fore-vacuum safety valves
TVV 001, fore-vacuum safety valve, 230 V AC(PM Z01 205)
TVV 001, fore-vacuum safety valve, 115 V AC(PM Z01 206)
Valves|Sealing gas valves, shielded (normally closed)
Venting|Power failure venting units (normally open)
Venting|Venting accessories
Flange with Pipe Thread, DN 16 ISO-KF, G 1/8"(PM 016 780 -T)
Push-in fitting for 6 mm tube, G 1/8"(PM 016 781 -T)
Push-in fitting for 8 mm tube, G 1/8"(PM 016 782 -T)
Hose nozzle for 9 mm hose, G 1/8"(PM 016 783 -T)
Banjo fitting(PM 016 787 -T)
Screw-in flange, DN 10 ISO-KF, G 1/8"(PM 033 737 -T)
Banjo fitting, small(PM 143 877 -T)
TTV 001, Drier for Venting Turbopumps(PM Z00 121)
Venting|Venting valves (normally closed)
Vibration Reduction|Vibration dampers
Vibration damper for HiPace 300/400, DN 100 ISO-K/F(PM 006 459 AX)
