Pfeiffer Vacuum

ASI 35 with control panel (cable length 1.8 m), 3.5 m cable length to the Electronic module, sniffing option, fully configurable I/O interface

QR-Code

Overview
  • Control panel with 1.8 m cable length
  • 3.5 m cable length between the Vacuum module and the Electronic module
  • Sniffing option allowing high admissible flow and multiprobes set-up
  • Fully configurable I/O interface (37 pins D-Sub), with live status visible on the Control panel
  • Ethernet, USB and RS-232 available as serial interfaces
  • Restricted access to the settings menu to avoid any wrong manipulation while the system is in operation
  • Universal voltage: no possible mistake whatever the country where the leak detection system is prepared and installed
  • High helium pumping speed for optimized response time

Product view

S12S0102MM9A
Order number: S12S0102MM9A
Similar Image
Technical data
517-Pumping speed for He: High sensitivity leak test mode: 6 l/s
Detectable gases 4He, 3He, H2
Dimensions Control panel (L x W x H) 241 x 54 x 133 mm | 9.49 x 2.13 x 5.24 inch
Dimensions Electronic module (L x W x H) 216 x 317 x 111 mm | 8.5 x 12.48 x 4.37 inch
Dimensions Vacuum module (L x W x H) 279 x 264 x 197 mm | 10.98 x 10.39 x 7.76 inch
Flange (in) 1 flange: DN 25 ISO-KF; 2 flanges: DN 16 ISO-KF
I/O interfaces 6 Digital inputs (Allocated functions configurable); 3 Analog outputs (Configurable : Helium signal log, Mantissa, Exponent, Inlet pressure); 5 Relays outputs (Allocated functions configurable); 4 Transistor/open collector outputs (Allocated functions con
Interfaces RS-232, USB
Max. inlet test pressure Gross leak test mode: 18 hPa; Normal leak test mode: 1 hPa; High sensitivity test mode: 0.2 hPa
Minimum detectable leak rate for helium (sniffing leak detection) 1.5 · 10-9 Pa m3/s
Minimum detectable leak rate for helium (vacuum leak detection) Gross leak test mode: 3.5 · 10-9 Pa m3/s; Normal leak test mode: 1 · 10-11 Pa m3/s; High sensitivity leak test mode: 5 · 10-13 Pa m3/s
Operating temperature 10-45
Power consumption max. 300 W
Pumping speed for He: Normal leak test mode: 1.8 l/s
Start-up time (20°C) without calibration ~ 3 min
Supply 90-240 V, 50/60 Hz
Test method Vacuum and sniffing leak detection
Warranty: Year(s) 3
Weight: Control panel 1.3 kg | 2.87 lb
Weight: Electronic module: 5 kg | 11.02 lb
Weight: Vacuum module 15 kg | 33.07 lb
Accessories
Dimensions

Massbild-TIM-RS

Downloads
File Type Language Date Filesize Action
Data sheet PDF EN 11-17-2017 ~ 495.2 KB Download

File Type Language Date Filesize Action
ASI 35 - Maintenance Instruction (123356MEN_02) PDF EN 07-04-2017 ~ 2.5 MB Download
Operating instructions ASI 35 - Utilisation (123356OEN_02) PDF EN 07-04-2017 ~ 1.9 MB Download
Operating instructions RS232 Communication Protocol - Detectors 3G - Operating (122215OEN_05) PDF EN 11-30-2015 ~ 1.1 MB Download
Operating instructions RS232 Communication Protocol - Detectors 3G - Memo (122215CEN_03) PDF EN 11-30-2015 ~ 102.3 KB Download
Operating instructions Sniffing Kit (ASI 35) - Installation (123589IEN_02) PDF EN 07-05-2017 ~ 608.8 KB Download
Operating instructions Calibration kit (ASI 35) - Installation (123588IEN_02) PDF EN 07-05-2017 ~ 495.5 KB Download
Operating instructions 37 pin I/O Interface - Operating (123894OEN_02) PDF EN 11-30-2015 ~ 2.1 MB Download
Operating instructions 37 pin I/O Interface - Installation (123895IEN_02) PDF EN 11-30-2015 ~ 1,017.7 KB Download

Product Overview

No items selected

Favorites

You have not selected any article to add to your favorites

Compare Products

There are no products selected for comparison.

Your local contact

Pfeiffer Vacuum Inc.
24 Trafalgar Square
NH 03063-1988 Nashua
USA

T: +1 (800) 248-8254
F: +1 (888) 658-7983

This website uses cookies to ensure you get the best experience on our website. More info