HiPace® 80 | Pfeiffer Vacuum

HiPace® 80 with TC 110, DN 63 ISO-K

QR-Code

Overview

Small yet powerful turbopump with a pumping speed of up to 67 l/s for N₂
Integrated TC 110 drive electronics
For installation in any orientation
Ideal for dependable systems integration
Extensive accessories expand the range of applications

Product view

Technical data

Bearing	Hybrid
Compression ratio for Ar	> 1 · 10¹¹
Compression ratio for H₂	1.4 · 10⁵
Compression ratio for He	1.3 · 10⁷
Compression ratio for N₂	> 1 · 10¹¹
Cooling method, optional	Air/Water
Cooling method, standard	Convection
Cooling water consumption	75 l/h
Cooling water temperature	5-25 °C \| 41-77 °F \| 278-298 K
Electronic drive unit	with TC 110
Flange (in)	DN 63 ISO-K
Flange (out)	DN 16 ISO-KF/G ¼"
Fore-vacuum max. for N₂	22 hPa \| 16.5 Torr \| 22 mbar
Gas throughput at full rotational speed for Ar	0.54 hPa·l/s
Gas throughput at full rotational speed for H₂	15.3 hPa·l/s
Gas throughput at full rotational speed for He	2.7 hPa·l/s
Gas throughput at full rotational speed for N₂	1.3 hPa·l/s
Interfaces	RS-485, Remote
Mounting orientation	in any orientation
Permissible magnetic field max.	3.3 mT
Protection category	IP54
Pumping speed for Ar	66 l/s
Pumping speed for H₂	48 l/s
Pumping speed for He	58 l/s
Pumping speed for N₂	67 l/s
Pumping speed range	80 l/s
Rotation speed ± 2 %	90,000 rpm \| 90,000 min^-1
Rotation speed variable	50 - 100 %
Run-up time	1.7 min
Sound pressure level	≤ 48 dB(A)
Ultimate pressure according to PNEUROP	< 1 · 10^-7 hPa \| < 7.5 · 10^-8 Torr \| < 1 · 10^-7 mbar
Venting connection	G 1/8"
Weight	2.4 kg \| 5.29 lb

Accessories

Adapters/connections TC 110

Enclosure for plug, spraywater-protected, 15-pole, D-sub (P 0998 016)

Mains power plug for TC 110/120 and mating plug for E74 interface, straight (P 4723 110)

Mains power plug angled for TC 110/120 and mating plug for interface E74 (P 4723 111)

TCS 11, adapter for TC 110/120 with RS-485 interface (PM 061 636 -U)

TCS 12, adapter for TC 110/120 with interface RS-485, 4 accessory ports and coupling set (PM 061 638 -U)

TCS 13, adapter for TC 110/120 with interface RS-485, 2 accessory ports and coupling set (PM 061 856 -U)

Mains cables

Mains cable 230 V AC, CEE 7/7 to C13, 3 m (P 4564 309 ZA)

Mains cable 115 V AC, NEMA 5-15 to C13, 3 m (P 4564 309 ZE)

Mains cable 208 V AC, NEMA 6-15 to C13, 3 m (P 4564 309 ZF)

RS-485 accessories

Y-Connector M12 to RS-485 (P 4723 010)

USB converter to RS-485 interface (PM 061 207 -T)

Connector M12 to RS-485 (PM 061 270 -X)

Termination resistor for RS-485 (PT 348 105 -T)

Power separator for RS-485 (PT 348 132 -T)

Vibration damper

Vibration damper for HiPace 60/80, DN 63 ISO-K (PM 006 800 -X)

Mounting kits for HiPace, including coated centering ring, splinter shield and bracket screws

Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring, splinter shield and bracket screws (PM 016 361 -T)

Mounting kits for HiPace, including coated centering ring, protection screen and bracket screws

Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring, protection screen and bracket screws (PM 016 362 -T)

Mounting kits for HiPace, including coated centering ring and claws

Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring and claws (PM 016 510 -T)

Mounting kits for HiPace, including coated centering ring, splinter shield and claws

Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring, splinter and claw grips (PM 016 511 -T)

Mounting kits for HiPace, including coated centering ring, protection screen and claws

Mounting kit for HiPace 60/80, DN 63 ISO-K, including coated centering ring with integrated protection screen and claws grips (PM 016 512 -T)

Water cooling

Water cooling for HiPace 60 P, HiPace 80 and for SplitFlow 50/80 with push-in fitting, 8 mm (PM 016 623 -T)

Venting accessory with small flange, G 1/8", hoses, air drier

Screw-on flange, DN 16 ISO-KF, G 1/8" (PM 016 780 -T)

Push-in fitting for 6 mm hose, G 1/8" (PM 016 781 -T)

Push-in fitting for 8 mm hose, G 1/8" (PM 016 782 -T)

Hose nozzle for 9 mm hose, G 1/8" (PM 016 783 -T)

Banjo fitting (PM 016 787 -T)

Screw-in flange, DN 10 ISO-KF, G 1/8" (PM 033 737 -T)

Banjo fitting, small (PM 143 877 -T)

TTV 001, dryer for venting turbopumps (PM Z00 121)

Control and display units

HPU 001, Handheld Programming Unit (PM 051 510 -T)

DCU 002, Display Control Unit (PM 061 348 -T)

Accessory for DCU/HPU

Accessories package for HPU 001/PC (PM 061 005 -T)

Accessories RS-485

Interface cable, M12 m straight/M12 m straight, 3 m (PM 061 283 -T)

Accessories Diaphragm pumps

TPS 110, mains pack for wall/standard rail fitting (PM 061 340 -T)

TPS 180, mains pack for wall/standard rail fitting (PM 061 341 -T)

Connection cable TPS 180 - MVP 006-4 with HiPace 80/HiPace 10, 2 x 0.5 m (PM 061 399 -T)

Mains pack 19" rack module 3HU with front panel

TPS 111, mains pack 19" rack module 3HU (PM 061 344 -T)

TPS 181, mains pack 19" rack module 3HU (PM 061 345 -T)

Connection cables

Connection cable with RS-485 interface for TC 110/120 to power supply (PM 061 350 -T)

Connection cable with RS-485 interface and 2 accessory ports for TC110/120 to power supply (PM 061 351 -T)

Connection cable with RS-485 interface and 3 accessory ports for TC 110/120 to power supply (PM 061 512 -T)

Connection cable for HiPace with TC 110/120 (PM 061 543 -T)

Connection cable incl. 2 accessory ports for TC 110/120 to power supply (PM 061 552 -T)

Relay boxes suitable for TC 110, TC 400 and TCP 350

Relay box for backing pump, single phase 20 A for TC 110/120 and TCP 350, M8 plug (PM 061 373 -T)

Wall rail fitting

Wall rail fitting for TPS 110/180/310/400 (PM 061 392 -T)

Front panel kit as spare part

Front panel kit for TPS 111 (PM 061 393 -T)

Front panel kit for TPS 181 (PM 061 394 -T)

Extension cables

Extension cable M8 on M8 (PM 061 783 -T)

Interface cables

Interface cable, M12 m straight/ M12 m angled 0.7 m (PM 061 791 -T)

Adapter and control cables

TCS 17 for control of backing pumps (PM 071 093 -U)

HiPace - ACP connection cable (PM 071 142 -X)

Shielded relay boxes suitable for TC 110/TC 400 with PB, TC 1200 and TM 700

Relay box, shielded, for backing pumps, 1-phase 7A for TC 110/120 and TCP 350, plug M8 (PM 071 282 -X)

DCU with integrated power supply

DCU 110, Display control unit incl. power supply (PM C01 820)

DCU 180, Display control unit incl. power supply (PM C01 821)

Fore-vacuum safety valves

TVV 001 fore-vacuum safety valve, 230 V AC (PM Z01 205)

TVV 001 fore-vacuum safety valve, 115 V AC (PM Z01 206)

Venting valve (normally closed)

Venting valve, shielded, 24 V DC, G 1/8", for connection to TC 110/120 (PM Z01 290)

Venting valve, 24 V DC, G 1/8" without cable (PM Z01 293)

Air coolings (unshielded)

Air cooling for HiPace 60 P, HiPace 80 and SplitFlow 50/80 with TC 110/120 (PM Z01 300)

Sealing gas valve, shielded (normally closed)

Sealing gas valve, shielded for HiPace 30/60/80 with TC 110 (PM Z01 310)

Sealing gas throttle

Sealing gas throttle for HiPace 30/60/80 (PM Z01 316)

Power failure venting units (normally open)

Shielded power failure venting unit, 24 V DC, G 1/8", for connection to TC 110/120 (PM Z01 330)

Air coolings 115/230 V

Air cooling for HiPace 60/80, SplitFlow 50/80, 230 V (PM Z01 343)

Air cooling for HiPace 60 P and 80, SplitFlow 50/80, 115 V (PM Z01 344)

Pressure Sensors

TIC 010, Adapter for two sensors (PT R70 000)

RPT 010, Digital Piezo/Pirani Sensor (PT R71 100)

IKT 010, Digital Cold Cathode Sensor, low current (PT R72 100)

IKT 011, Digital Cold Cathode Sensor, high current (PT R73 100)

Mounting kit with collar flange, coated centering ring, Hexagon bolts

Mounting kit for DN 63 ISO-K to ISO-F, with collar flange, coated centering ring, hexagon bolts (PM 016 930 -T)

Mounting kit with collar flange, coated centering ring with splinter shield, hexagon bolts

Mounting kit for DN 63 ISO-K to ISO-F, with collar flange, coated centering ring with splinter shield, hexagon bolts (PM 016 931-T)

Mounting kit with collar flange, coated centering ring with protection screen, hexagon bolts

Mounting kit for DN 63 ISO-K to ISO-F, with collar flange, coated centering ring with protection screen, hexagon bolts (PM 016 932 -T)

DN ISO-K/-F Mounting kit with collar flange, coated centering ring, stud screws

Mounting kit for DN 63 ISO-K to ISO-F, with collar flange, coated centering ring, stud screws (PM 016 935 -T)

Mounting kit with collar flange, coated centering ring with splinter shield, stud screws

Mounting kit for DN 63 ISO-K to ISO-F, with collar flange, coated centering ring with splinter shield, stud screws (PM 016 936 -T)

Mounting kit with collar flange, coated centering ring with protection screen, stud screws

Mounting kit for DN 63 ISO-K to ISO-F, with collar flange, coated centering ring with protection screen, stud screws (PM 016 937 -T)

Dimensions

Massbild-TIM-RS

Characteristic

Kennlinie-TIM-RS-1

Downloads

File	Type	Language	Date	Filesize	Action
Data sheet	PDF	EN	04-20-2018	~ 690.9 KB	Download
Stepfile	STP	EN	06-23-2010	~ 1.6 MB	Download

File	Type	Language	Date	Filesize	Action
Operating instructions HiPace 80 with TC 110 (PT0208BEN_K)	PDF	EN	10-26-2017	~ 3.9 MB	Download
Operating instructions TC 110, Electronic drive unit for HiPace (PT0204BEN_T)	PDF	EN	10-26-2017	~ 2.4 MB	Download
Software TurboViewer	ZIP	EN	06-17-2015	~ 29.9 MB	Download
Software Pfeiffer Vacuum LabView Driver 2014	ZIP	EN	11-29-2017	~ 2.2 MB	Download