Mains cable US standard 250 V IEC, For magpower electronics and ATH 500 M
Cable with M8 plug for connection to TC 110/120 included in the shipment, Normally opened valve, Venting mode, venting time and venting period adjustable via electronic drive unit and DCU/HPU, G 1/8" connection on both sides, Can be directly connected to the accessory outlets of the connection cable, TCS 12/13 as well as TC 110/120 with interface (PB, E74, RS)
Cable with M12 plug for connection to TC 400, TM 700, TCP 350 and TC 1200 included in scope of delivery, Normally opened valve, Venting mode, venting time and venting period adjustable via electronic drive unit and DCU/HPU, G 1/8" connection on both sides, Can be connected directly to the accessory outputs of the drive electronics unit
Shielded M12 plug and socket, To separate service areas
For monitoring cooling water inlet pressure
Protects vacuum systems from over pressures, No safety component in terms of the machinery directive 2006/42/EC, Opening pressure approx. 200 to 500 hPa, Please observe the maximum flow rate., Tightness at 1000 hPa differential pressure
Protects vacuum systems from over pressures, No safety component in terms of the machinery directive 2006/42/EC, Opening pressure with nut in middle position approx. 450 hPa, The opening pressure can vary by more than +/- 50 hPa and shows a hysteresis., For valves not actuated for a period of time, initial cracking pressure may be higher than the set cracking pressure., Please observe the maximum flow rate., Tightness at 1000 hPa differential pressure, An exhaust hose can be attached to the KF connection at the outlet side
Protects vacuum systems from over pressures, No safety component in terms of the machinery directive 2006/42/EC, Opening pressure with nut in middle position approx. 400 hPa, The opening pressure can vary by more than +/- 50 hPa and shows a hysteresis., For valves not actuated for a period of time, initial cracking pressure may be higher than the set cracking pressure., Please observe the maximum flow rate., Tightness at 1000 hPa differential pressure, An exhaust hose can be attached to the KF connection at the outlet side
Don't worry we won't leave you in a vacuum
