Jump directly to the main content
Pfeiffer Vacuum
search
compare_arrowsCompare0
shopping_cart
  • Mobile Homeexpand_more
  • Productsexpand_more
  • Contactexpand_more
  • Home
  • All Products
  • Accessories

Accessories

keyboard_arrow_left
Adapter (electrical) (63)expand_more
Adapter cables (4)Adapter measurement (10)Adapters and control cables (2)Compatibility modules (1)Feedthrough connectors (16)Head phone connectors (1)I/O-modules (1)Profibus (8)Remote (12)RS-232/485 (8)
Assembly (204)expand_more
Adjusting elements for fastening the feet (6)Blank panels (4)Bottle holder (3)CF-F, Mounting kits (16)Chamber feet for standard vacuum chamber, cubical (KBH) (3)Claw sets DN ISO-K (24)DN ISO-KF, mounting kits (4)DN ISO-K/-F Mounting kits (30)DN ISO-K/-F, sealings (20)DN ISO-K, mounting kits, claws (3)DN ISO-K, mounting kits, bracket screws (36)DN ISO-F, mounting kits (24)Earthquake mounting kits (1)Mounting kits for ATH-M (10)Mounting tables (7)Sealing kits (10)Supporting frames (2)Wall rail fittings (1)
Cables & Connectors (299)expand_more
Analog/relay cables (4)Backing pump control cables (8)Cables to connect an external gauge to an ASM 340 equipped with 37 pin I/O board (3)Connection cable (89)Extension cable (29)Flat cables for D-sub, vacuum-suitable (4)Heater band cables and water valve cables (10)Mains cable (45)Measurement cable (88)Plug (2)RS-485 Interface cables (11)Valve cable (external drive electronics to venting valve) (6)
Calibration (47)expand_more
Calibrated leaks with isolation valves (26)Calibrated leaks without isolation valves (15)Calibration kits (1)Gas line type calibrated leaks (1)Sniffing calibration (4)
Caps / Clamps (26)expand_more
CF Flange caps (7)ISO-K hose clamps (3)ISO-K flange caps (6)ISO-KF hose clamps (4)ISO-KF flange caps (4)Locking clamps (1)Sealing cover (1)
Chambers (2)expand_more
Test chambers to be mounted on the inlet flange of ASM 182 series (2)
Connections (44)expand_more
Adapters for OktaLine to rotary vane pumps (2)Adapters Turbopump to backing pump (6)Bypass options (2)Coupling Sets for TC 110/TCS 12/13 (1)Exhaust connectors (1)Gear chamber evacuation (9)Inlet pipes (1)Intake flanges (2)Refill device for HeliSpray (8)Screw-in flanges (7)Standard connections OmniStar™ / ThermoStar™ (2)Valve connections (3)
Control units (114)expand_more
CIP adapter (5)External electronic drive unit (7)Foot pedals for cycle start (1)Frequency converter (8)Interface boards (7)Measuring boards for TPG 300 (8)Power supply packs and display units (65)Relay box for backing pumps (7)Remote controls (6)Valve control units (1)
Conversion / Upgrade (1)expand_more
Accessories for generation change from xPT 100 to xPT 200 (1)
Cooling (34)expand_more
Air cooling (22)Finned tube coolers (2)Water cooling (10)
Doors (18)expand_more
CF Quick-Access-Doors (10)ISO-F quick-access-doors (8)
Flanges / Ports (78)expand_more
CF ports (47)ISO-K ports (12)ISO-KF ports (8)ISO-F ports (5)Rotatable flanges (6)
Heating (27)expand_more
Heating jackets (24)Heating rods for zeolite traps (ZFO) (3)
Monitoring (50)expand_more
Mechanical manometers, suitable for UHV (2)Oil/operating fluid level monitoring (8)Oil compensating lines with oil level monitoring (11)Operations monitoring units (8)Pressure sensors (4)Pressure switches (5)Saturation indicators (4)Sealing gas monitoring units (1)Temperature sensors (6)Temperature switch (1)
Noise reduction (10)expand_more
Exhaust silencers (6)Noise reduction covers (4)
Operating fluid (54)expand_more
Mineral oil (20)Sealants and lubricants (12)Synthetic oil (22)
Protection (178)expand_more
Activated carbon filters (2)Baffles (1)Burst disks (1)Catalyzer traps (3)CF-F, splinter shields, protection screens (10)Cold traps (2)Condensate separator, corrosive version (2)Condensate separators (4)DN ISO-KF, sealings, splinter shields, protection screens (1)DN ISO-K/-F, sealings, splinter shields, protection screens (15)Dust separators/inlet particle filters (10)Flushing devices (17)Inlet filter (6)Inlet screens (12)Magnetic shielding (1)Motor protection (2)N2 pressurization kits (1)Oil filters (11)Oil mist eliminators (23)Oil return units from oil mist eliminators (18)Sealing gas kits (12)Sealing gas throttles (5)Soft starters (3)Sorption traps (2)Sorption traps, corrosive version (4)Splinter shield (10)
Sniffing / Spraying (21)expand_more
Helium pistols / spray guns (3)Sniffer probes (17)Sniffing kits for ASI 35 (1)
Software (5)expand_more
3D files (1)Displays & data logging (4)
Tools (11)expand_more
Face spanner (2)Ignition aid positioning tools (1)Toolkits (8)
Transport (11)expand_more
Transportation accessories (8)Transport cart (3)
Valves (38)expand_more
Fore-vacuum safety valves (2)Gas ballast conversion kits (4)Gas ballast valves, magnetic (8)Gas ballast valves, manual (5)Individual components for gas inlet systems (2)Overpressure valves (3)Sealing gas valves, shielded (normally closed) (11)Vacuum safety valves (3)Water inlet valves (1)
Venting (19)expand_more
Power failure venting units (normally open) (2)Venting accessories (8)Venting valves (normally closed) (8)Venting valves (normally open) (1)
Vibration reduction (16)expand_more
Foot plates (1)Vibration dampers (11)Vibration isolators (4)
keyboard_arrow_right
1355 results found
  • Feedthrough connectors
    Inside connector, vacuum-side, 4-pole for DN 40 ISO-KF

    For feedthrough DN 40 ISO-KF, 4-pole

    PF 296 024 -T
  • Feedthrough connectors
    Inside connector, vacuum-side, 7-pole for DN 40 ISO-KF

    For feedthrough DN 40 ISO-KF, 7-pole

    PF 296 012
  • Feedthrough connectors
    Inside connector, vacuum-side, 9-pole for DN 16 ISO-KF

    For feedthrough DN 16 ISO-KF, 9-pole

    PF 297 015 -T
  • image_not_supported
    Intake flanges
    Intake flange, DN 100 ISO-F

    DN 100 ISO-F, For Okta 500 A/AM, Incl. mounting material, Stainless steel 1.4301

    PK 055 473 -T
  • image_not_supported
    Intake flanges
    Intake flange, DN 63 ISO-F

    DN 63 ISO-F, For Okta 250 A/AM, Incl. mounting material, Stainless steel 1.4301

    PK 055 214 -T
  • image_not_supported
    Connection cable
    Interconnecting cable (pump to magpower external drive electronics), L = 1.0 m

    Between pump and magpower external drive electronics. Not required for OBC V4 equipped pumps, For all ATH M and ATP M series pumps except ATH 500 M, Cable length 1 m

    A215300-010-C6-D
  • image_not_supported
    Connection cable
    Interconnecting cable (pump to magpower external drive electronics), L = 10.0 m

    Between pump and magpower external drive electronics. Not required for OBC V4 equipped pumps, For all ATH M and ATP M series pumps except ATH 500 M, Cable length 10 m

    A215300-100-C6-D
  • image_not_supported
    Connection cable
    Interconnecting cable (pump to magpower external drive electronics), L = 15.0 m

    Between pump and magpower external drive electronics. Not required for OBC V4 equipped pumps, For all ATH M and ATP M series pumps except ATH 500 M, Cable length 15 m

    A215300-150-C6-D
  • image_not_supported
    Connection cable
    Interconnecting cable (pump to magpower external drive electronics), L = 2.0 m

    Between pump and magpower external drive electronics. Not required for OBC V4 equipped pumps, For all ATH M and ATP M series pumps except ATH 500 M, Cable length 2 m

    A215300-020-C6-D
Items per Page:
Page:
  • arrow_backPrevious
  • Page: 1
  • …
  • Page: 62
  • Page: 63
  • …
  • Page: 151
  • 62 of 151
  • arrow_forwardNext
Products are loaded...

Don't worry we won't leave you in a vacuum

Sitemap

  • Locations
  • About Pfeiffer
  • Careers
  • Investor Relations
  • News & Media

Legal Notes

  • General Terms and Conditions
  • Legal Notice
  • Data Protection

Service

  • My Account
  • Contact

© 2025 Pfeiffer Vacuum+Fab Solutions

Contactmail