Pumping speed range, depending on version, from 890–6.220 m3/h due to variable speed control, Extremely short pump-down times due to superior, next-generation drive concept, Intelligent interface technology allows process adjustment and condition monitoring (Industry 4.0), Hermetically sealed pump with leak rate of < 1·10-6 Pa m3/s since outward dynamic seals are eliminated, Low operating costs due to state-of-the-art air cooling up to +40 °C and motor technology (surpasses the IE4 standard for asynchronous motors), Long service life and maximum operational reliability thanks to intelligent condition monitoring and innovative rotor/motor concept.
Pumping speed range, depending on version, from2.700–8.120 m3/h due to variable speed control, Extremely short pump-down times due to superior, next-generation drive concept, Intelligent interface technology allows process adjustment and condition monitoring (Industry 4.0), Hermetically sealed pump with leak rate of < 1·10-6 Pa m3/s since outward dynamic seals are eliminated, Effective water cooling and motor technology (surpasses the IE4 standard for asynchronous motors), Long service life and maximum operational reliability thanks to intelligent condition monitoring and innovative rotor/motor concept.
Pumping speed range, depending on version, from 2.700–8.120 m3/h due to variable speed control, Extremely short pump-down times due to superior, next-generation drive concept, Intelligent interface technology allows process adjustment and condition monitoring (Industry 4.0), Hermetically sealed pump with leak rate of < 1·10-6 Pa m3/s since outward dynamic seals are eliminated, Low operating costs due to state-of-the-art air cooling up to +40 °C and motor technology (surpasses the IE4 standard for asynchronous motors), Long service life and maximum operational reliability thanks to intelligent condition monitoring and innovative rotor/motor concept.
High-performance Roots pump with a pumping speed of 590 to 1420 m3/h, PTFE overflow-valve (Δp = 30 hPa), No thermal overload thanks to integrated overflow valve, With 3-phase motor II 2G Ex de IIC T4, Pumps are hermetically sealed (leak rate <1 · 10-6 Pa m3/s) – risk of zone entrainment is minimized, Pressure surge resistance according to EN 1333, PN level 16, Explosion safety due to reliable construction and temperature monitoring – installation without additional flame arrester possible, Note: For the operation of the pumps, the terms of the operating instructions apply. We are pleased to provide you with the right solution for your application!, Working conditions: Pump is inside and outside suitable for operation in equipment class II, equipment category 2 (G) for gases and vapors of explosion class IIA and IIB, temperature class T3 according directive 2014/34/EU
High-performance Roots pump with a pumping speed of 590 to 1420 m3/h, PTFE overflow-valve (Δp = 30 hPa), No thermal overload thanks to integrated overflow valve, With 3-phase motor II 2G Ex de IIC T4, Pumps are hermetically sealed (leak rate <1 · 10-6 Pa m3/s) – risk of zone entrainment is minimized, Pressure surge resistance according to EN 1333, PN level 16, Explosion safety due to reliable construction and temperature monitoring – installation without additional flame arrester possible, Note: For the operation of the pumps, the terms of the operating instructions apply. We are pleased to provide you with the right solution for your application!, Working conditions: Pump is inside and outside suitable for operation in equipment class II, equipment category 3 (G) for gases and vapors of explosion class IIA and IIB, temperature class T3 according directive 2014/34/EU
High-performance Roots pump with a pumping speed of 590 to 1420 m3/h, Blocked overflow valve, For operation with frequency converter or switch-on at a defined backing pressure, i.e. for continuous processes, With 3-phase motor II 2G Ex de IIC T4, Pumps are hermetically sealed (leak rate <1 · 10-6 Pa m3/s) – risk of zone entrainment is minimized, Pressure surge resistance according to EN 1333, PN level 16, Explosion safety due to reliable construction and temperature monitoring – installation without additional flame arrester possible, Note: For the operation of the pumps, the terms of the operating instructions apply. We are pleased to provide you with the right solution for your application!, Working conditions: Pump is inside and outside suitable for operation in equipment class II, equipment category 3 (G) for gases and vapors of explosion class IIA and IIB, temperature class T3 according directive 2014/34/EU
High-performance Roots pump with a pumping speed of 590 to 1420 m3/h, Blocked overflow valve, For operation with frequency converter or switch-on at a defined backing pressure, i.e. for continuous processes, With 3-phase motor II 2G Ex de IIC T4, Pumps are hermetically sealed (leak rate <1 · 10-6 Pa m3/s) – risk of zone entrainment is minimized, Pressure surge resistance according to EN 1333, PN level 16, Explosion safety due to reliable construction and temperature monitoring – installation without additional flame arrester possible, Note: For the operation of the pumps, the terms of the operating instructions apply. We are pleased to provide you with the right solution for your application!, Working conditions: Pump is inside and outside suitable for operation in equipment class II, equipment category 2 (G) for gases and vapors of explosion class IIA and IIB, temperature class T3 according directive 2014/34/EU
High-performance Roots pump with a pumping speed of 590 to 1775 m3/h and magnetic coupling, For mains voltage: 230/400 V, 50 Hz or 265/460 V, 60 Hz, No thermal overload thanks to integrated overflow valve, For all low and medium vacuum applications
Don't worry we won't leave you in a vacuum
