Mehrstufige Wälzkolbenpumpen - Pfeiffer Vacuum

CP versions (ACP 28 / ACP 40)

The pump is designed for applications where gases are recirculated or recovered. Gas must be clean (dust-free) and non corrosive. CP pumps are not equipped with a gas ballast to avoid any misuse of the pump. The gear box is equipped with a vacuum port that can facilitate initial pumping of the installation before filling with recirculation gas. Leak tightness of the pump is improved.

Customer value

  • Air cooling: no water supply required
  • Frequency converter: hour meter, remote operation mode (RS-485, dry contacts, Profibus on request), multiple rotational speed selection (power saving, noise reduction, adaptation to application cycle)
  • Universal power supply: wide voltage range 50/6 0Hz, single-phase and three-phase
  • Standards: compliance with CE standards, UL/CSA certified, SEMI S2 certified

Product

  • Dry multi-stage Roots technology, SD versions, ACP pumps with a pumping speed of max. 28m3/h
  • No particle contamination, thanks to frictionless design: no wearing parts in the pumped gases path
  • No hydrocarbon vapors backstreaming: ACP series pumps are free of lubricant inside the pumping module
  • Constant performances (Pumping speed, max. and ultimate pressure)
  • High reliability: thanks to our expertise of dry multi-stage Roots pumps since 1988
  • Low maintenance costs: no annual field service, complete overhaul only every 22000 hours for ACP 28/40
  • Ideal for rare gas, isotope gas or expensive gases recirculation.
  • Dry multi-stage Roots technology, CP versions, ACP pumps with a pumping speed of max. 28m3/h
  • No particle contamination, thanks to frictionless design: no wearing parts in the pumped gases path
  • No hydrocarbon vapors backstreaming: ACP series pumps are free of lubricant inside the pumping module
  • Constant performances (Pumping speed, max. and ultimate pressure)
  • High reliability: thanks to our expertise of dry multi-stage Roots pumps since 1988
  • Low maintenance costs: no annual field service, complete overhaul only every 22000 hours for ACP 28/40
  • Ideal for rare gas, isotope gas or expensive gases recirculation.
Your local contact
Pfeiffer Vacuum Inc.
24 Trafalgar Square
NH 03063-1988 Nashua
USA

+1 (800) 248-8254
+1 (888) 658-7983
write message

This website uses cookies to ensure you get the best experience on our website. More info