SD versions (ACP 15 / ACP 28 / ACP 40 / ACP 90)
The pump is designed for applications that require pumping of clean (dust-free) and non corrosive gases. Standard pumps are equipped with a gas ballast device to improve pumping of light gases and avoid condensation vapors inside the pump. Three gas ballast options to satisfy customer needs.
Customer value
- Air cooling: no water supply required
- Frequency converter: hour meter, remote operation mode (RS-485, dry contacts, Profibus on request), multiple rotational speed selection (power saving, noise reduction, adaptation to application cycle)
- Universal power supply: wide voltage range 50/6 0Hz, single-phase and three-phase
- Standards: compliance with CE standards, UL/CSA certified, SEMI S2 certified
Product
- Dry multi-stage Roots technology, SD versions, ACP pumps with a pumping speed of max. 15 m3/h
- No particle contamination, thanks to frictionless design: no wearing parts in the pumped gases path
- No hydrocarbon vapors backstreaming: ACP series pumps are free of lubricant inside the pumping module
- Constant performances (Pumping speed, max. and ultimate pressure)
- High reliability: thanks to our expertise of dry multi-stage Roots pumps since 1988
- Low maintenance costs: no annual field service, complete overhaul only every 20000 hours for ACP 15
- Condensable vapor ability: with gas ballast ports and drainable silencer
- Oil-free multi-stage roots pumps of the ACP series, SD versions, with a max. pumping speed of 28 m3/h
- No particle contamination, thanks to frictionless design: no wear parts in the path of the pumped gases
- No backflow of hydrocarbon vapors: ACP series pumps are lubricant-free inside the pumping module
- Constant performance (pumping speed, max. continuous inlet pressure and final pressure)
- High reliability: thanks to our expertise with oil-free multi-stage roots pumps since 1988
- Low maintenance costs: no annual field service, complete overhaul only every 22,000 hours for ACP 28/ 40
- Condensable vapor ability: with gas ballast ports and drainable silencer. ACP series pumps can handle up to 1000 g/h of pure water vapor
- Dry multi-stage Roots technology, SD versions, ACP pumps with a Pumping speed of max. 40 m3/h
- No particle contamination, thanks to frictionless design: no wearing parts in the pumped gases path
- No hydrocarbon vapors backstreaming: ACP series pumps are free of lubricant inside the pumping module
- Constant performances (Pumping speed, max. and ultimate pressure)
- High reliability : thanks to our expertise of dry multi-stage Roots pumps since 1988
- Low maintenance costs: no annual field service, complete overhaul only every 22000 hours for ACP 28/40
- Condensable vapor ability: with gas ballast ports and drainable silencer. ACP series pumps can handle up to 100 g/h of pure water vapor
- Dry multi-stage Roots technology,SD versions, ACP pumps with a pumping speed of max. 90 m3/h. High pumping speed at high pressure.
- No particle contamination, thanks to frictionless design: no wearing parts in the pumped gases path
- No hydrocarbon vapor backstreaming: ACP series pumps are free of lubricant inside the pumping module
- Constant performances (Pumping speed and ultimate pressure)
- High reliability: thanks to our expertise of dry multi-stage Roots pumps since 1988
- Low maintenance cost. No annual maintenance. Maintenance of low pressure bearings can be done on-site
- Thanks to high flow gas ballast combined with chemical resistant pump material: SD version is capable to evacuate up to 2.4 Kg/h of water vapor.
