Scroll Pumps - The Extremely Quiet, Compact And Oil-Free Pumps.
HiScroll - the oil-free scroll pumps
The HiScroll series consists of three dry scroll pumps with a nominal pumping speed of 6 – 20 m3/h. The pumps are characterized by their high performance when evacuating against atmosphere. Their powerful IPM1) synchronous motors with sensorless INFORM® control2) achieve up to 15 % higher efficiency compared to conventional drives. This enables highest performance at low operating temperature and helps to save electricity costs.
Lowest noise emission on the market
HiScroll pumps are extremely quiet at <47 dB[A] (<42 dB[A] in stand-by mode). Their low-vibration operation and compact design make them ideal for use in quiet and highly integrated working environments, such as on mass spectrometers, in research institutes or leak detection systems.
Low-maintenance scroll pump with intelligent AccessLink control system
The HiScroll‘s adaptive fan control provides optimal cooling in all operating conditions and reduces noise emissions. By using the optional integrated pressure sensor, maintenance cycles can be significantly extended as the intelligent pressure and speed control reduces energy consumption, wear and tear as well as noise emission.
HiScroll pumps can be easily connected via RS-485 or ProfiNet to e.g. turbopumps or display units as well as to a higher-level external control system.
The standardized AccessLink accessory ports allow the use of many optional accessories, which are automatically recognized by the HiScroll electronics. No further manual parameterization is required. In this way, AccessLink contributes to greater convenience and security for our customers.
Compared to other pumping systems, HiScroll pumps have fewer moving parts due to their single-shaft design, which reduces the likelihood of failures. The proven quality of Pfeiffer Vacuum components ensures a long service life. Pump maintenance is simple and enables short service times.
The safety factor of industrial scroll pumps is an important aspect, and refers to the ability of the scroll pump to operate stably and safely under certain conditions without increasing the risk of damage or accidents.
The hermetically sealed HiScroll pumps feature a check valve as a safety measure. The two-stage gas ballast valve ensures high water vapor tolerance and allows individual process adaptation of the pump.
Scroll pumps with ATEX certification
HiScroll pumps are already certified to ATEX II 3/-G Ex h IIC T4 Gc X +5° C ≤ Ta ≤ +40 °C as standard. This means they can be used with internal explosion protection of equipment category 3G for Ex zone 2 with gas types IIC. These versions are only available without the optional integrated pressure sensor.
- Absolutely dry as well as oil-free spiral pump
- High comfort, low noise level, low vibration
- Optimal compact design
- Lowest operating costs
- Process adaptation
- Safe operation
- Explosion-proof ATEX design
Applications for HiScroll pumps
- Mass spectrometry
- Leak detection
- Semiconductor technology
- Gas recovery
- Vacuum drying
We drive sustainable solutions
The use of novel IPM1) synchronous motors with sensorless INFORM® control2) in HiScroll pumps allows their power consumption to be significantly reduced despite high pumping performance. This not only results in lower operating costs for the user: the motor also achieves premium efficiency and significantly exceeds the minimum values of efficiency level IE3 as applicable to standard asynchronous motors. Everyone benefits from this.
In addition, significantly smaller product dimensions are achieved by using the new IPM1) motor technology.
However, benefits for the environment are not limited exclusively to the pump‘s performance and installation dimensions. Our HiScroll already scores points in production through deliberate material savings. For example, less copper is used and advanced technologies mean that additional sensors are not required. The pump housing, like the hood and the housing of the electronics, is manufactured by casting, which avoids excessive production waste.
Even in the packaging, thought has been given to conserving resources: Weight-optimized and space-saving insulating materials effectively protect our HiScroll from transport damage while also ensuring optimized transport weight.
Last but not least, man and machine benefit equally from the use of state-of-the-art technologies: HiScroll series scroll pumps emit less waste heat and also have a longer service life thanks to innovative standby operation. They run extremely quietly and with low vibration, making their working environment safe and comfortable.
1 Interior Permanent Magnet
2 INFORM® method according to Prof. Schrödl