Backing pump control

HiPace turbopumps afford meaningful control of backing pumps. Pumping station control is effected via TC 110, TC 400, TC 1200 and TM 700 as well as TCP 350. Parameter setting with DCU. Process adaptation performed in interval mode.


The fore-vacuum-safety valves are installed in the fore-vacuum line of a pump combination between the turbopump and the fore-vacuum pump and provide additional protection against backstreaming in the event of power failure.
To control backing pumps connected with drive electronics TC 400/1200, TM 700 and TCP 350
Adapter and control cables allow, in combination, the connection of drive electronics to backing pump and valves ACP pump (adixen fore-vacuum pump)
Your local contact
Pfeiffer Vacuum Inc.
24 Trafalgar Square
NH 03063-1988 Nashua

+1 (800) 248-8254
+1 (888) 658-7983
write message