| Bearing | Hybrid |
| Compression ratio for Ar | > 1 · 1011 |
| Compression ratio for H2 | 9 · 105 |
| Compression ratio for He | > 1 · 108 |
| Compression ratio for N2 | > 1 · 1011 |
| Connection flange (in) | DN 100 ISO-K |
| Connection flange (out) | DN 16 ISO-KF/G ¼" |
| Cooling method | Air |
| Cooling method, optional | Air |
| Current, max. | 3,8 A |
| Electronic drive unit | with TC 110 |
| Final pressure according to PNEUROP | < 1 · 10-7 hPa | < 7.5 · 10-8 Torr | < 1 · 10-7 mbar |
| Final pressure without gas ballast | < 1 · 10-7 hPa | < 7.5 · 10-8 Torr | < 1 · 10-7 mbar |
| Fore-vacuum max. for N2 | 11 hPa | 8.25 Torr | 11 mbar |
| Gas throughput at final rotation speed for Ar | 0.5 hPa·l/s |
| Gas throughput at final rotation speed for H2 | 5 hPa·l/s |
| Gas throughput at final rotation speed for He | 1.8 hPa·l/s |
| Gas throughput at final rotation speed for N2 | 0.9 hPa·l/s |
| I/O interfaces | RS-485, Remote |
| Integrated power supply pack | YES |
| Interfaces, extended | Profibus DeviceNet E74 |
| Mounting orientation | Arbitrary |
| Operating voltage: V DC | 24 (± 5 %) V DC |
| Permissible radial magnetic field max. | 5.5 mT |
| Power consumption max. | 100 W |
| Protection degree | IP30 |
| Pumping speed for Ar | 255 l/s |
| Pumping speed for H2 | 220 l/s |
| Pumping speed for He | 255 l/s |
| Pumping speed for N2 | 260 l/s |
| Rotation speed ± 2 % | 60,000 rpm | 60,000 min-1 |
| Run-up time | 4 min |
| Sound pressure level | ≤50 dB(A) |
| Venting connection | G 1/8" |
| Weight | 6.9 kg | 15.21 lb |
| TIC 010, adapter for two sensors | PT R70 000 |
| Y-connector M12 for RS-485 | P 4723 010 | |
| USB RS-485 converter | PM 061 207 -T | |
| Coupling M12 for RS-485 | PM 061 270 -X | |
| Terminal resistor for RS-485 | PT 348 105 -T | |
| Power separator for RS-485 | PT 348 132 -T |
| Control cable for valve | PM 061 687 -T | |
| HiPace – ACP connection cable | PM 071 142 -X |
| Mains cable 230 V AC, CEE 7/7 to C13, 3 m | P 4564 309 ZA | |
| Mains cable 115 V AC, NEMA 5-15 to C13, 3 m | P 4564 309 ZE | |
| Mains cable 208 V AC, NEMA 6-15 to C13, 3 m | P 4564 309 ZF |
| Interface cable, M12 m straight/M12 m straight, 3 m | PM 061 283 -T | |
| Interface cable, M12 m straight/ M12 m angled, 0.7 m | PM 061 791 -T |
| Relay box for backing pumps, 1-phase 20 A for TC 110/120 and TCP 350, plug M8 | PM 061 373 -T | |
| Relay box, shielded, for backing pumps, 1-phase 7A for TC 110/120 and TCP 350, plug M8 | PM 071 282 -X |
| HPU 001, Handheld Programming Unit | PM 051 510 -T | |
| Accessories package for HPU 001/PC | PM 061 005 -T | |
| DCU 002, Display Control Unit | PM 061 348 AT |
| Centering ring with multifunction coating, DN 100 ISO-K/-F | PM 016 210 -U |
| Sealing gas throttle for HiPace 300 | PM Z01 317 |
| TVV 001, fore-vacuum safety valve, 230 V AC | PM Z01 205 | |
| TVV 001, fore-vacuum safety valve, 115 V AC | PM Z01 206 |
| Sealing gas valve, shielded for HiPace 300 with TC 110/120 | PM Z01 311 |
| Shielded power failure venting unit, 24 V DC, G 1/8", for connection to TC 110/120 | PM Z01 330 |
| Venting valve, shielded, 24 V DC, G 1/8", for connection to TC 110/120 | PM Z01 290 |
| Vibration damper for HiPace 300/400, DN 100 ISO-K/F | PM 006 459 AX |
| File | Type | Language | Date | Filesize | |
|---|---|---|---|---|---|
| Data sheet | EN | 09-21-2021 | ~ 627 KB | ||
| Stepfile | STP | EN | 06-23-2010 | ~ 2.2 MB | |
| T | +1 (800) 248-8254 |
| F | +1 (888) 658-7983 |
