| Bearing | Hybrid |
| Compression ratio for Ar | 2 · 106 |
| Compression ratio for H2 | 2 · 102 |
| Compression ratio for He | 3.5 · 102 |
| Compression ratio for N2 | 1 · 106 |
| Cooling method, optional | Air/Water |
| Cooling method, standard | Convection |
| Cooling water flow | 75 l/h |
| Cooling water flow, max | 75 l/h |
| Cooling water flow, min | 75 l/h |
| Cooling water temperature | 5-25 °C | 41-77 °F | 278-298 K |
| Current max. | 4,6 A |
| Electronic drive unit | with TC 110 |
| Flange (in) | DN 63 ISO-K |
| Flange (out) | DN 16 ISO-KF/G ¼" |
| Fore-vacuum max. for N2 | 4 hPa | 3 Torr | 4 mbar |
| Gas throughput at full rotational speed for Ar | 0.83 hPa·l/s |
| Gas throughput at full rotational speed for H2 | 55 hPa·l/s |
| Gas throughput at full rotational speed for He | 55 hPa·l/s |
| Gas throughput at full rotational speed for N2 | 9.2 hPa·l/s |
| I/O interfaces | RS-485, Remote |
| Mounting orientation | Any |
| Operating voltage: V DC | 24 (± 5 %) V DC |
| Permissible magnetic field max. | 4 mT |
| Power consumption max. | 110 W |
| Protection category | IP54 |
| Pumping speed for Ar | 63 l/s |
| Pumping speed for H2 | 28 l/s |
| Pumping speed for He | 48 l/s |
| Pumping speed for N2 | 64 l/s |
| Rotation speed ± 2 % | 90,000 rpm | 90,000 min-1 |
| Rotation speed variable | 50 – 100 % |
| Run-up time | 1 min |
| Sound pressure level | ≤48 dB(A) |
| Ultimate pressure according to PNEUROP | < 1 · 10-6 hPa | < 7.5 · 10-7 Torr | < 1 · 10-6 mbar |
| Ultimate pressure without gas ballast | 1 · 10-6 hPa | 7.5 · 10-7 Torr | 1 · 10-6 mbar |
| Venting connection | G 1/8" |
| Weight | 2.2 kg | 4.85 lb |
| Y-Connector M12 to RS-485 | P 4723 010 | |
| USB converter to RS-485 interface | PM 061 207 -T | |
| Coupling M12 for RS-485 | PM 061 270 -X | |
| Termination resistor for RS-485 | PT 348 105 -T | |
| Power separator for RS-485 | PT 348 132 -T |
| Control cable for valve | PM 061 687 -T | |
| HiPace – ACP connection cable | PM 071 142 -X |
| Extension cable M8 on M8 | PM 061 783 -T |
| Mains cable 230 V AC, CEE 7/7 to C13, 3 m | P 4564 309 ZA | |
| Mains cable 115 V AC, NEMA 5-15 to C13, 3 m | P 4564 309 ZE | |
| Mains cable 208 V AC, NEMA 6-15 to C13, 3 m | P 4564 309 ZF |
| Interface cable, M12 m straight/M12 m straight, 3 m | PM 061 283 -T | |
| Interface cable, M12 m straight/ M12 m angled, 0.7 m | PM 061 791 -T |
| Relay box for backing pumps, 1-phase 20 A for TC 110/120 and TCP 350, plug M8 | PM 061 373 -T | |
| Relay box, shielded, for backing pumps, 1-phase 7A for TC 110/120 and TCP 350, plug M8 | PM 071 282 -X |
| HPU 001, Handheld programming unit | PM 051 510 -T | |
| Accessories package for HPU 001/PC | PM 061 005 -T | |
| TPS 110, power supply pack for wall/standard rail fitting | PM 061 340 -T | |
| TPS 180, power supply pack for wall/standard rail fitting | PM 061 341 -T | |
| TPS 111, power supply pack 3HU 19" rack module | PM 061 344 -T | |
| TPS 181, power supply pack 19" rack module 3HU | PM 061 345 -T | |
| DCU 002, Display Control Unit | PM 061 348 AT | |
| Front panel kit for TPS 111 | PM 061 393 -T | |
| Front panel kit for TPS 181 | PM 061 394 -T | |
| DCU 110, Display control unit with power supply pack | PM C01 820 | |
| DCU 180, Display control unit incl. power supply pack 19” | PM C01 821 |
| Water cooling for HiPace 60 P | HiPace 80 and for SplitFlow 50/80 with push-in fitting, 8 mm | PM 016 623 -T |
| RPT 010, Digital Piezo/Pirani Sensor | PT R71 100 | |
| IKT 010, Digital cold cathode sensor, low current | PT R72 100 | |
| IKT 011, Digital cold cathode sensor, high current | PT R73 100 |
| Centering ring with multifunction coating, DN 63 ISO-K/-F | PM 016 206 -U |
| Wall rail fitting for TPS 110/180/310/400 | PM 061 392 -T |
| TIC 010, Adapter for two sensors | PT R70 000 |
| Sealing gas throttle for HiPace 30/60/80 | PM Z01 316 |
| TVV 001, fore-vacuum safety valve, 230 V AC | PM Z01 205 | |
| TVV 001, fore-vacuum safety valve, 115 V AC | PM Z01 206 |
| Sealing gas valve, shielded for HiPace 30/60/80 with TC 110 | PM Z01 310 |
| Shielded power failure venting unit, 24 V DC, G 1/8", for connection to TC 110/120 | PM Z01 330 |
| Screw-on flange, DN 16 ISO-KF, G 1/8" | PM 016 780 -T | |
| Push-in fitting for 6 mm tube, G 1/8" | PM 016 781 -T | |
| Push-in fitting for 8 mm tube, G 1/8" | PM 016 782 -T | |
| Hose nozzle for 9 mm hose, G 1/8" | PM 016 783 -T | |
| Banjo fitting | PM 016 787 -T | |
| Screw-in flange, DN 10 ISO-KF, G 1/8" | PM 033 737 -T | |
| Banjo fitting, small | PM 143 877 -T | |
| TTV 001, Drier for Venting Turbopumps | PM Z00 121 |
| Venting valve, shielded, 24 V DC, G 1/8", for connection to TC 110/120 | PM Z01 290 | |
| Venting valve, 24 V DC, G 1/8" without cable | PM Z01 293 |
| Vibration damper for HiPace 60/80, DN 63 ISO-K | PM 006 800 -X |
| File | Type | Language | Date | Filesize | |
|---|---|---|---|---|---|
| Data sheet | EN | 10-18-2019 | ~ 686 KB | ||
| Stepfile | STP | EN | 06-23-2010 | ~ 1.6 MB | |
| File | Type | Language | Date | Filesize | |
|---|---|---|---|---|---|
| Operating instructions HiPace 60 P with TC 110 (PT0291BEN_G) | EN | 05-03-2016 | ~ 3.5 MB | ||
| Operating instructions TC 110, Electronic drive unit for HiPace (PT0204BEN_U) | EN | 03-19-2019 | ~ 1.9 MB | ||
| Software TurboViewer (Version 010400) | ZIP | EN | 06-28-2018 | ~ 29.9 MB | |
| Software LabView Driver (Pfeiffer Vacuum) | ZIP | EN | 07-16-2019 | ~ 2.2 MB | |
| T | +1 (800) 248-8254 |
| F | +1 (888) 658-7983 |
This website uses cookies to ensure you get the best experience on our website. More info
