| Bearing | Hybrid |
| Compression ratio for Ar | > 1 · 1011 |
| Compression ratio for H2 | 1.4 · 105 |
| Compression ratio for He | 1.3 · 107 |
| Compression ratio for N2 | > 1 · 1011 |
| Connection flange (in) | DN 40 ISO-KF |
| Connection flange (out) | DN 16 ISO-KF/G ¼" |
| Cooling method | Convection |
| Cooling method, optional | Air |
| Current, max. | 3 A |
| Electronic drive unit | with TC 110 |
| Final pressure | < 1 · 10-7 hPa | < 7.5 · 10-8 Torr | < 1 · 10-7 mbar |
| Fore-vacuum max. for N2 | 19 hPa | 14.25 Torr | 19 mbar |
| Gas throughput at final rotation speed for Ar | 0.37 hPa·l/s |
| Gas throughput at final rotation speed for H2 | 8.9 hPa·l/s |
| Gas throughput at final rotation speed for He | 2.3 hPa·l/s |
| Gas throughput at final rotation speed for N2 | 0.7 hPa·l/s |
| I/O interfaces | RS-485, Remote, E74 |
| Integrated power supply pack | YES |
| Interfaces, extended | E74 |
| Mounting orientation | Arbitrary |
| Operating voltage: V DC | 24 (± 5 %) V DC |
| Permissible radial magnetic field max. | 3.3 mT |
| Power consumption max. | 62 W |
| Protection degree | IP30 |
| Pumping speed for Ar | 30 l/s |
| Pumping speed for H2 | 38 l/s |
| Pumping speed for He | 41 l/s |
| Pumping speed for N2 | 35 l/s |
| Rotation speed ± 2 % | 90,000 rpm | 90,000 min-1 |
| Rotation speed variable | 50 – 100 % |
| Run-up time | 1.9 min |
| Sound pressure level | ≤48 dB(A) |
| Venting connection | G 1/8" |
| Weight | 2.9 kg | 6.39 lb |
| TIC 010, adapter for two sensors | PT R70 000 |
| Y-connector M12 for RS-485 | P 4723 010 | |
| USB RS-485 converter | PM 061 207 -T | |
| Coupling M12 for RS-485 | PM 061 270 -X | |
| Terminal resistor for RS-485 | PT 348 105 -T | |
| Power separator for RS-485 | PT 348 132 -T |
| Control cable for valve | PM 061 687 -T | |
| HiPace – ACP connection cable | PM 071 142 -X | |
| Connection cable MVP-TC-TPS, 3 m | PE 100 013 -T |
| Mains cable 230 V AC, CEE 7/7 to C13, 3 m | P 4564 309 ZA | |
| Mains cable 115 V AC, NEMA 5-15 to C13, 3 m | P 4564 309 ZE | |
| Mains cable 208 V AC, NEMA 6-15 to C13, 3 m | P 4564 309 ZF |
| Interface cable, M12 m straight / M12 m straight, 3 m | PM 061 283 -T | |
| Interface cable, M12 m straight / M12 m angled, 0.7 m | PM 061 791 -T |
| Connection kit for mounting of pumps, DN 16 ISO-KF | 120SWS016-1000 |
| Relay box for backing pumps, single phase 20 A for TC 110/120 and TCP 350, plug M8 | PM 061 373 -T | |
| Relay box, shielded, for backing pumps, 1-phase 7A for TC 110/120 and TCP 350, plug M8 | PM 071 282 -X |
| Water cooling for HiPace 30 | HiPace 80 mini with push-in fitting, 8 mm | PM 016 847 -T |
| Mounting kit for HiPace 60/80, DN 40 ISO-KF, including centering ring and clamping ring | PM 016 625 -T | |
| Mounting kit for HiPace 60/80, DN 40 ISO-KF, splinter shield, clamping ring | PM 016 626-T |
| Centering ring, FPM/aluminum, DN 40 ISO-KF | PF 110 140 -T |
| Centering ring with integrated mesh screen, DN 40 ISO-KF | PF 113 240 -T | |
| Centering ring with integrated splinter shield, DN 40 ISO-KF | PM 006 375 -X |
| Sealing gas throttle for HiPace 30/60/80 | PM Z01 316 |
| TVV 001, fore-vacuum safety valve, 230 V AC | PM Z01 205 | |
| TVV 001, fore-vacuum safety valve, 115 V AC | PM Z01 206 |
| AVC 040 PA, angle valve, electro-pneumatic, with PI, with PV, PV 24 V DC | PF A58 204 |
| Sealing gas valve, shielded for HiPace 30/60/80 with TC 110 | PM Z01 310 |
| Shielded power failure venting unit, 24 V DC, G 1/8", for connection to TC 110/120 | PM Z01 330 |
| Venting valve, shielded, 24 V DC, G 1/8", for connection to TC 110/120 | PM Z01 290 | |
| Venting valve, 24 V DC, G 1/8" without cable | PM Z01 293 |
| Vibration damper for HiPace 60/80, DN 40 ISO-KF | PM 006 799 -X |
| File | Type | Language | Date | Filesize | |
|---|---|---|---|---|---|
| Data sheet | EN | 08-11-2022 | ~ 558.2 KB | ||
| T | +1 (800) 248-8254 |
| F | +1 (888) 658-7983 |
