Pfeiffer Vacuum

Rotary Vane Pumps

Rotary vane pumps for all applications in the low and medium vacuum range.
Rotary vane pumps have proven themselves for years in many applications. Coordinated accessories and the selection of ideal equipment make the Pfeiffer Vacuum rotary vane pumps usable for many processes.

Customer benefits

  • Single and two stage designs with pumping speeds
    of 1.3 to 1,600 m3/h
  • Space saving and ideal for system integration
  • High pumping speed with small dimensions
  • Proven design concept
  • Process-safe through integrated high vacuum safety valve
  • Non-ferrous metal free design offers additional operating safety
  • Optionally as corrosive gas version as well

Applications

  • All applications in low
    and medium vacuum
  • Backing pump for turbopumps and roots pumps
  • General laboratory applications
  • Analytics
  • Chemical laboratory
  • Freeze drying
  • Process engineering

Two-stage Rotary Vane Pumps

 

DuoLine
Two-stage Rotary Vane Pumps Pumps DuoLine

  • Low operating costs
  • No maintenance of shaft seal rings
  • Integrated gas ballast and safety valves

 

Pascal
Two-stage Rotary Vane Pumps Pascal

  • Easy to use and integrate
  • Minimal oil return flow

Single-stage Rotary Vane Pumps

HenaLine
Single-stage Rotary Vane Pumps HenaLine

  • High pumping speeds with small dimensions
  • Integrated oil mist filter for clean exhaust air

UnoLine
Single-stage Rotary Vane Pumps UnoLine

  • Low operating costs
  • No maintenance of shaft seal rings
  • Integrated gas ballast and safety valves

UnoLine Plus
Single-stage Rotary Vane Pumps UnoLine Plus

  • Extremely high water vapor tolerance
  • For hardest industrial applications

Pascal
Single-stage Rotary Vane Pumps Pascal

  • Easy to use and integrate
  • Minimal oil backflow

The functional principle of the rotary vane pumps
The pump principle of the rotary vane pumps is based on a continual, cyclical change in the suction volume. This is made possible through a rotor eccentrically aligned to the pump housing with movable vanes. The required sealing function is guaranteed through the oil.

The rotary vane pumps are offered in two configurations. Pumps with a single stage pump system (Pascal, HenaLine, UnoLine and UnoLine Plus) cover an inlet pressure range of 1,600 to approx. 0,5 hPa; those with a two stage serial pump system (DuoLine and Pascal) have an expanded inlet pressure range in high vacuum of up to 5 · 10-4 mbar.

Operating notes on the process adaption
Ideally, the pumps are operated in a process frame between 100 mbar and a pressure of about a decade above the final pressure. Above 100 mbar, the exhaust oil separator elements clog very quickly through the oily exhaust gas stream. In the final pressure range, the strong dependency of the pumping speed on the suction pressure comes to bear. In this state, no stationary process can be operated.

All models are able to feed a ballast gas, to prevent the accumulation of liquids due to condensing moisture. The use of a gas ballast affects the performance data of the pumps in various ways. For example, the pumping speed of single-stage rotary vane pumps will be reduced by the amount of the gas ballast proportion. This will also raise the final pressure. However, due to their design, gas ballast does not affect the pumping speed of two-stage pumps.

Product Selector

Technical training

Utilize the opportunities that are offered by technical training.

Rotary Vane Pumps

Page functions
  • How do you rate this page?

  • Recommend this page!